How to set up monitoring for my Fronius Wattpilot EV charger?

The Fronius Solar.wattpilot app can be used to start up, configure, operate, visualise and update the Wattpilot. The app is available for Android™ and iOS®.

Download The Fronius Solar.wattpilot app is available on the following platforms.

• Google Play Store
• Apple App Store

You can access the Wattpilot via the app as follows:

Launching the app

1. Open the Fronius Solar.wattpilot app on the end device and follow the Setup wizard.
2. Read and accept the terms of use
3. Click on "Connect"

NOTE: Access for the Fronius Solar.wattpilot app must be allowed for end devices with an iOS operating system.
iOS settings > Privacy > Local network > Fronius Solar.wattpilot > Allow access to local network

Setting up a hot spot

The Wattpilot permanently opens a hot spot

1. Scan the QR code on the reset card or connecdt the end device to the WLAN hot spot. The passowrd is located on the reset card of the Wattpilot.
2. Follow the further instructions in the app.

NOTE: The selected WLAN of the Wattpilot must remain connected despite the absence of an Internet connection for end devices with an Android operating system.

Setting up the WLAN 

1. Select WLAN and enter the password
2. Follow the further instuctions in the app.

NOTE: It can take up to 1 minute to establish the connection! If the signal strength is low, a WLAN repeater must be installed, for example.

Adding a Wattpilot

New or connected Wattpilot devices can be added in the Fronius Solar.wattpilot app.

1. Click on the "+" symbol
2. Click on the "Add" for the connected Wattpilot
3. Follow the further instructions in the app