Sigen EV AC Charger Datasheet
Description
Sigen EVAC | 7 | 11 | 22 | Units |
AC Input & Output | ||||
| Nominal charging power | 7 | 11 | 22 | kW |
| Nominal output voltage | 1P/N/PE, 220 ~ 240 | 3P/N/PE, 220 ~ 240 / 380 ~ 415 | 3P/N/PE, 220 ~ 240 / 380 ~ 415 | V |
| Output current range | 6 ~ 32 | 6 ~ 16 | 6 ~ 32 | A |
| Nominal AC frequency | 50 / 60 | Hz | ||
| Vehicle connection | Type 2 connector / Type 2 socket with shutter | |||
| AC input cable width range | 2.5 ~ 6.0 | mm2 | ||
Protection | ||||
Integrated DC fault detection (Residual direct current protective device (RDC-PD) with integrated AC pulsating DC and 6mA DC detection, evalution and mechanical switching in the Sigen EV AC Charger is tested according to IEC 62955.) | 6 | mA | ||
Integrated AC fault detection (Residual direct current protective device (RDC-PD) with integrated AC pulsating DC and 6mA DC detection, evalution and mechanical switching in the Sigen EV AC Charger is tested according to IEC 62955.) | 30 | mA | ||
| Flame retardant rating | UL94-5VB | |||
| Over / Under voltage protection | Supported | |||
| Overload protection | Supported | |||
| Over temperature protection | Supported | |||
| PEN protection | Supported | |||
| Randomized charging delay | Supported | |||
| Ground fault protection | Supported | |||
| Surge protection | Supported | |||
| Grounding system | TT, TN, IT | |||
User Interface & Communication | ||||
| Protocol | RS485, Modbus RTU | |||
| Communication | 4G / WLAN / Fast Ethernet | |||
| Authentication | RFID card / App / Auto-charge (no authentication) | |||
| Display | LED indicator / App | |||
Charging mode (This function needs to be used with SigenStor.) | 100% PV charging / Solar boost charging / Fast charging | |||
| Metering | External meter with RS485 / Integrated metering IC | |||
Dynamic load management (This function needs to be used with Sigen Power Sensor.) | Supported | |||
| Phase switching | Supported | |||
| OCPP protocol | OCPP 1.6J ED 2 | |||
General Data | ||||
| Dimensions (W / H / D) | 234 / 384 / 126 | mm | ||
| Weight (case B / case C) | 4.5 / 6.4 | kg° | ||
| Storage temperature range | -40 ~ 70 | C° | ||
| Operating temperature range | -30 ~ 55 | C | ||
| Relative humidity range | 5% ~ 95% | |||
| Max. operating altitude | 4000 | m | ||
| Cooling | Natural convection | |||
| Ingress protection rating | IP65 | |||
| Installation method | Wall-mounted | |||
| Application environment | Outdoor / Indoor | |||
| Standby self-consumption | < 3.6 | W | ||
| Standard charging cable length | 5 | m | ||
Standard Compliance | ||||
Standard (For all standards refer to the certificates category in the Sigenergy website.) | EN IEC 61851-1, IEC 62955, EN IEC 61851-21-2, ETSI EN 300 330 V2.1.1, ETSI EN 301 511 V12.5.1, EN IEC 62311, EN50665, ETSI EN 300 328 V2.2.2 | |||
