Sigen Energy Gateway Home Series User Manual

Chapter 1 Safety Precautions

Before installation, operation, and maintenance of the equipment, familiarize yourself with this document.

The "Danger ", "Warning", "Caution" items described in this manual are only supplementary to all precautions.

The Company shall not be liable for equipment damage or property loss caused by the following reasons:

Failure to obtain approval from the national, regional power authority.
The installation environment does not meet international, national, or regional standards.
Failure to observe local laws, regulations and norms when operating and maintaining equipment.
The installation area does not meet the requirements of the equipment.
Failure to follow the instructions and precautions in this document.
Failure to follow the warning labels on equipment or tools.
Negligent, improper operation or intentional damage.
Damage caused by your or a third party's replacement of our equipment.
The equipment is damaged by your or the third-party company to use the accessories supplied with the package and purchase and use the accessories of the same specifications for installation.
Equipment damage caused by improper operations such as disassembling, replacing, or modifying the software code without authorization.
Equipment damage caused by force majeure (such as war, earthquake, fire, storm, lightning, flood, debris flow, etc.).
Damage caused by the failure of the natural environment or external power parameters to meet the standard requirements of the equipment during actual operation (for example, the actual operating temperature of the equipment is too high or too low).
The equipment was stolen.
The equipment is damaged after the warranty period.

Do not expose the device to high temperature or heat sources (such as sunlight, fire, or heaters) around the equipment for a long time.
Do not clean or soak the equipment with water, alcohol, or oil to avoid power leakage.
Do not knock or impact the equipment. In case of an accident, please stop using the equipment immediately and contact your installer or sales representative. The equipment shall be inspected and evaluated by professional personnel before continuing to use.

Do not use the equipment with faults. If the equipment appears abnormal (for example, appearance distortion), contact your installer or sales representative. You are prohibited from disassembling it on their own.
Carbon dioxide fire extinguishers and ABC dry powder fire extinguishers are recommended at home. It is prohibited to disassemble the equipment by yourself.