Tesla Wall Connector Gen 3 Installation Manual – AU NZ
Description
PERFORMANCE SPECIFICATIONS
| Voltage and Wiring | 1-phase 230V L-N 3- phase 230V L-L 3- phase 400V L-L |
| Max Current Output | 32 A |
| Power Output | Up to 22 kW |
| Terminal Blocks | Stranded: 4-25 mm2, copper only Solid: 1.5-20 mm2, copper only |
| Supported Earthing Scheme | TN/TT/IT |
| Frequency | 50/60 Hz |
| Means of Disconnect | External branch circuit breaker |
| Residual Current Detection | Integrated (Type A + DC 6 mA) |
| Firmware Updates | Over-the-air via Wi-Fi |
| Compatibility | Model S, Model 3, Model X, Model Y |
| Wi-Fi | 2.4 GHz, 802.11b/g/n |
| Power Sharing | Automatic load management |
| Warranty | 48 months for personal use |
| 1. | Faceplate |
| 2. | Light bar (vertical) |
| 3. | Main unit |
| 4. | Charge handle button |
| 5. | Charge handle |
MECHANICAL SPECIFICATIONS
| Cable Length | 7.3 m (24 ft) |
| Wall Connector Dimensions | Height: 345 mm (13.6 in) Width: 155 mm (6.1 in) Depth: 110 mm (4.3 in) |
| Wire Box Bracket Dimensions | Height: 250 mm (9.8 in) Width: 120 mm (4.7 in) Depth: 50 mm (2.0 in) |
| Weight (including wirebox) | 6.8 kg (15 lb) |
ENVIRONMENTAL SPECIFICATIONS
| Installation | Indoor/outdoor |
| Operating Temperature | -30˚C to 50˚C (-22˚F to 122˚F) |
| Storage Temperature | -40˚C to 85˚C (-40˚F to 185˚F) |
| Enclosure Rating | IP 44 |
| Ventilation | Not required |
COMPLIANCE INFORMATION
| Safety | Integrated GFCI |
| Residual Current Detection | Integrated (Type A + DC 6 mA) |
| Certifications | CE, IEC 61851-1 CB |
