Pure Electric Sanden Wi-Fi Controller Reset Wi-Fi

Wi-Fi Controller Reset: (Model: GAU-A45HPD with Wi-Fi-HPD Wi-Fi Controller)

Symptoms:

• Wi-Fi Controller shows connectivity, but cannot change settings
• Heat Pump Status remains on Standby
• Wi-Fi status lights are correct but cannot find the Wi-Fi controller when tapping “Add Device”.

Actions:

• Check that Communication setting mode, C_SE is set to onHP on internal, Smart Controller
• Remove front cover of Wi-Fi controller, using a Phillips head screwdriver.

NB: Do not use a screw gun / drill as you will overtighten the screws when re-installing 

• Identify “SW1” and flick the 4th switch position to the opposite side. (You do not need to flick it back).
• LED display will be Red/Blue/Red
• Open the Smart Life App and tap “+” top right corner,then tap “Add Device”:
• App will search for devices, displays the Heat Pump under the “Discovering devices” heading. Tap “Add”.
• Enter Wi-Fi Uername and Password, then tap “Next”
• App will confirm device being added, then tap “Done”.
• LED display will be Red/Blue/Green